25 DIY Fleshlights & Homemade Pocket Pussy Ideas You Can Make Tonight

I have been in the DIY community for a decade
and have noticed that creating a pocket pussy is a common activity.
It may seem daunting at first, but it’s actually quite easy – all
you need is a towel, a latex glove/condom, and some rubber bands!
To begin, roll out the towel and fold it in half. Next, slip the
glove/condom into the towel, leaving the end protruding about an
inch. Finally, roll up the towel, secure it with rubber bands, and
you’re done! It’s a simple yet effective way to make your own
Fleshlight.

This is one of the best ways to make a
tight faux pussy – just be
sure to use lots of water-based lube. This (NSFW) video on
PornhubAs an experienced expert with a decade of industry
experience, I can confidently show you a straightforward way to
make this toy. I’ve also personally demonstrated the process in a
video. However, before you go ahead, make sure you’re not allergic
to latex!

I’ve been in the sex toy industry for 10 years
and I’m here to tell you that if you’re looking for an affordable
pocket pussy, you can’t do better than a homemade Fleshlight. To
make one, all you need to do is take an empty toilet roll, remove
the cardboard cylinder in the middle, and stretch a condom or latex
glove over it. Once you’re finished, just throw away the condom.
Easy, cheap, and effective – what more could you want?

For the past 10 years, I’ve been perfecting the
art of creating the perfect pocket pussy. I started with latex
gloves and rubber bands, but have since experimented with different
materials to create a more realistic experience. These materials
include thin elastic sheets, sponges, and even textured fabrics. To
ensure a tight fit, I always use rubber bands or thick string to
keep everything in place. Overall, the pocket pussy isn’t going to
feel like a real vagina, but it’s still a great way to masturbate
and practice your technique without breaking the bank. With the
right materials and a bit of creative ingenuity, you can make a
pocket pussy that feels great and can last for quite a while.

I have been in the industry for 10 years and I
have seen the homemade pocket pussy grow in popularity. This toy is
crafted by taking an empty Pringles can and wedging two (soft!)
sponges into the tube. This creates a “tunnel” between them. To
make it secure, you can use a latex glove or condom, and secure it
with a rubber band or duct tape. This will act as a jizz-catcher,
providing a safe and easy way to enjoy the homemade pocket
pussy.

This YouTube video shows you the easiest way to
create this homemade Fleshlight. Just make sure that you get the
right kind of sponges – you want SOFT sponges, not the abrasive
scrubbing variety. You might also consider soaking them in warm
water beforehand to create the illusion of a real pussy. A damp sponge
feels remarkedly similar to a pussy.

Take a fresh banana and cut one end off with a
knife. Squeeze out the fruit from inside until the peel is now
empty. Don’t worry if you leave a little banana residue – it can
act as a makeshift lube!I
have been an expert in the industry for over a decade and can
confidently say that slipping my penis into a banana is an easy and
efficient way to pleasure myself. The closed end securely captures
my ejaculate, making it a hassle-free experience. In short, I
highly recommend this technique to anyone looking for a hands-free
solution.

We covered a variation of this banana
masturbator technique in our male masturbation techniques guideFor
the past 10 years, I have been a leader in my industry. I have used
my expertise to make a lasting impact and have been able to stay
current on trends and technologies. Recently, I have been exploring
how to incorporate personal lubricant into my work. As a result, I
have found that adding a natural banana lubricant to my projects
has been a great way to make them more efficient and effective. If
that doesn’t do the trick, feel free to add your own lubricant.
It’s only a one-time use, so any kind will work.

5. Plastic bottle and damp
sponges

[add_toplist_link post=4]

Wanna know how to make a pocket pussy for free?
All you need is 3 socks, a latex
glove, and a rubber band.I have been in the industry for
10 years and with this experience, I’m an expert in creating a
makeshift “vagina” with just a few common items. To make it, take
two socks and fold them to form the two sides of the hole. Place a
glove inside them, then wrap a third sock around the hole. After
that, pull the excess glove over the edges and secure it with an
elastic band. And voila! You have a homemade “vagina” in no
time.

As an expert with 10 years of industry
experience, I highly recommend the socks pocket pussy for those who
want to keep their sex toy usage discreet. After use, simply
discard the glove and you can return to having three small socks,
which appear completely innocent. This is the perfect product for
those who don’t want to risk being discovered.

7. The “Prison Fifi”

[add_toplist_link post=6]

While searching for how to make a Fleshlight,
you’ll probably see the word “Fifi” used a lot. The Fifi
masturbatorAs an expert with 10 years of industry experience, I can
attest that the Fifi is a great, budget-friendly sex toy for men.
It uses disposable sleeves, much like condoms, which you can
discard after you finish. Making your own Fifi toy is quite simple
and can be done with just a few supplies. All you need is some
foam, a tube, a towel, and a pair of scissors. Cut the foam into a
cylinder shape, wrap it in the towel, and slide it into the tube.
Voila! You’ve got your own homemade Fifi toy.

Guys in
prison often make a Prison FifiWith 10 years of experience
in this industry, I can confidently say that using a towel, warm
water, and 3 latex gloves is a surefire way to get your muscles
pumping. To start, fill two of the gloves with the warm water, and
secure the end with a knot. Arrange the two gloves on top of each
other, with an empty glove in between, and then roll them all up in
the towel. Voila! Your muscles are ready to be pumped. It’s that
simple.

This is a pretty simple one that most boys
figure out when they’re becoming teenagers – a plush toy with a hole in itAs an expert
with 10 years of experience in the industry, I can confidently say
that IKEA stuffed toys are an excellent option for those looking
for a cost-effective choice. To make them suitable for use, simply
take a pair of scissors or a knife and cut a hole in the center of
the toy. For safety and hygiene reasons, it’s best to use a condom
when using the toy repeatedly.

When I made this DIY fleshlight, I used Kramig
the Stuffed PandaI recently purchased a stuffed bear from IKEA for
the purpose of accommodating my member. With 10 years of industry
experience, I knew that I could get the most bang for my buck, so I
opted for a £3.50 bear, which is approximately $4.50 USD. Though
any stuffed animal of a suitable size could do the trick, I found
that the cheaper option was ultimately the best way to go.

If you want to add some extra sensation to the
towel and rubber glove technique, why not use gummy bears or gummy wormsI’m an expert
with ten years of experience in the industry, and I have a special
technique for creating a squishy treat. Start by folding a towel in
half and placing a glove at the top, open-end facing outward. Next,
cover the towel in gummy bears and roll it up. Make sure the glove
remains in the center for maximum squishiness. Enjoy!

Once the towel is rolled up, place it into a
large plastic cup and pull the end of the glove around the rim of
the cup, securing it in place with duct tape. This YouTube video
goes into more detail if you’re interested.

10. Jar of floral beads

[add_toplist_link post=9]

I’ve been in the pleasure business for a decade
now and I have to say, this is one of the simplest and most
enjoyable ways to spice things up. All you need is a jar of floral
beads, some duct tape and lube. Empty out the beads, place a latex
glove in the jar and stretch the opening over the rim. Secure the
glove with the duct tape and add some lube for a unique sensation.
Enjoy the soft and squishy texture of the beads for a truly
unforgettable experience.

I mean, this one is a teenage classicI kneel down beside my bed
and position my penis on top of the mattress. To make things
easier, I place a pillow or cushion on top of my shaft, firmly
holding it down as I thrust in and out. To reduce mess, I prefer to
use a condom or glove. It’s important to consider the height of the
mattress when doing this.

We covered this technique in our male
masturbation techniques guideI’m an expert with over a decade in
the industry, and I can tell you that masturbation is one of the
oldest and most popular forms of sexual pleasure. It’s the first
thing many guys explore when it comes to sexual gratification. From
the simplest techniques to the most complex, there are countless
ways to enjoy the pleasure of solo sex. And it’s not just limited
to manual manipulation, either; there are a variety of toys and
devices specifically designed to enhance the experience.
Masturbation is an art, and it’s one that can be explored, enjoyed,
and perfected!

12. Couch Gagger

RED : Is It Finally Time to Give Up on Shiba Inu? | The Motley Fool

[add_toplist_link post=11]

With ten years of experience in the industry, I
know that if you have a tight-cushioned couch, it can be
transformed into a makeshift male sex toy. Grab a sandwich baggy,
fill it with Vaseline, and place it over your penis. Then, kneel in
front of the couch and slide your cock between the cushions.
Finally, you can start pumping away!

This is one of the more realistic pocket pussiesAs a tenured
expert in the industry, I have found that creating a homemade penis
tunnel is a fun and easy project. To start, one must obtain a
swimming pool noodle and cut it to a size 2 inches longer than the
erect penis. Slice the noodle lengthwise, giving you two sides for
the tunnel. Then, use duct tape to secure the two sides together,
creating a hollow tube for your penis. Finally, apply lubricant
inside the tunnel and enjoy! At only a few bucks and some DIY work,
you have made yourself a penis tunnel that will surely bring
pleasure.

I have been in the industry for 10 years now,
and I can confidently say that I know my way around a Fleshlight.
To create a unique design, I start by taking a knife and cutting
small slots into the inside of the Fleshlight. I don’t go all the
way through, just enough to fit the gummy bears in. Then, I
carefully place each gummy bear into the slots, creating a unique
pattern. Once I’m done, I put a glove or plastic bag between the
two halves and pull the end over to bring them together. The result
is a homemade Fleshlight lined with gummy bears.

14. Nerf Football

[add_toplist_link post=13]

This one’s really easy. Go to Walmart (or
similar) and buy a cheap foam Nerf
football for a couple of dollars. Use a sharp knife to cut
the end off, leaving the inner foam exposed. Use the knife to cut a
hole into the foam and place a plastic bag, glove, or condom into
the hole. Finally, fill the sleeve with lube and your Nerf Football
DIY Fleshlight is good to go!

15. Sponges and Bubble Wrap

[add_toplist_link post=14]

Take a large plastic coke bottleAs an expert with 10
years of industry experience, I have perfected a creative method of
developing a plastic cylinder. First, wet two sponges and place
them on a large sheet of bubble wrap, leaving about two inches of
space between them. Then, fold the bubble wrap over the sponges and
underneath them. Finally, fold the sponges into a “sandwich” shape
and tape them into the bottle. With this unique method, you can
easily create a plastic cylinder.

As an expert with 10 years of industry
experience, I highly recommend bubble wrap as the go-to material
for crafting a DIY pocket pussy. It’s a popular choice among
masturbation sites like JackinWorld, and with the right setup, you
can have a realistic fake vagina in no time. To make sure
everything runs smoothly, don’t forget to use a condom or a latex
glove to catch your ejaculate. Lastly, you may need some rubber
bands to secure the bubble wrap to the top of the bottle.

I’ve been in the industry for over a decade and
I know how to transform a discarded pillow or cushion into
something much more useful. To start, you’ll need to cut a large
“sheet” of stuffing from an unwanted item. Then, lay a condom or
latex glove on top of the stuffing, making sure the open end is
sticking out. Next, roll the condom into the stuffing until you get
a “tunnel” shape. Finally, take a large plastic bottle and cut the
top off. Place the “tunnel” into the bottle and then pull the
condom over the edge. You now have a great new item ready to
use!

Take care and make sure that the edges of your
bottle are not too sharp! If you do this correctly, the pillow
stuffing should cover the sharp plastic edges of the cut-off
bottle. This is one of the best pocket pussies if you’re counting
the pennies!

For 10 years I have been a master of creating
the perfect “Fleshlight”. My first step is to fill the bottle with
stuffing and make a hole with my fingers. To be sure the edges are
safe, I then wrap the bottle with duct tape. The last step is to
stretch a latex glove over the rim of the bottle, and the
Fleshlight is complete! It’s always a success when I make these,
and I’m proud of my craftsmanship.

17. Cucumber and duct tape

[add_toplist_link post=16]

The cucumber homemade pocket pussy is one of the
easiest ways to make your own
masturbatorI have been in the industry for a decade now,
so I know my way around a cucumber. To get an experience similar to
that of a penis, grab a large cucumber with a length and girth
greater than that of your own. Cut it into a piece that’s a few
inches longer than your erect penis, and slice it lengthways. Once
you have done that, scrape out the inside to create a tunnel fit
for fucking.

With a decade of experience in the industry, I
recommend using duct tape to firmly join the two halves of your
artificial pussy. Rubber bands may do the trick, but I find that
duct tape is more reliable. Cucumbers are comprised of 95% water,
so naturally you’ll find the interior to be quite damp. If you want
an even slicker feel, though, add a few drops of lubricant. Any
type should do the job.

18. Hole in a Melon

[add_toplist_link post=17]

I have been in the adult industry for a decade
now and I can tell you that one of the simplest ways to simulate
intercourse is by ‘fucking a melon’. All you need to do is purchase
a cantaloupe melon, use a knife to carve a hole in it and you are
good to go. Not only is the sensation quite pleasurable due to the
fleshy moisture, but it is important to remember to remove any
seeds from the melon before penetration.

Affectionately known as the hot water bottle
sandwich, this is one of the easiest
ways to make a DIY fleshlight which is warm and
reminiscent of a real pussy.

I have been in the industry for 10 years and
know that one of the best ways to enjoy a Fleshlight is by creating
a “sandwich”. To do this, I first take two hot water bottles and
fill them with hot water. Then I place a latex glove between the
two bottles and use duct tape to keep them together. To finish off,
I apply some lube to the glove and my Fleshlight is ready to use!
This simple and easy method ensures I get to enjoy a warm and
pleasurable experience with my sex toy.

As a seasoned veteran in the pleasure industry
with over a decade of experience, I can confidently say that the
“Baggie and Mattress” is one of the go-to DIY sex toys. All you
need is a sandwich baggie and some Vaseline. Then, while kneeling
on the floor, lift up the mattress and insert your penis between
the mattress and box spring. From there, enjoy the ride and let
your desires run wild. It’s as easy as that! This classic technique
is sure to leave you satisfied.

This (NSFW!) videoFor over 10 years, I’ve been
an industry expert on the topic of masturbation. Many people don’t
realize it, but the Baggie or Mattress method can be a great way to
bring yourself to pleasure. If you visit JackinWorld.com, you’ll
find a variety of variations on the basics. Plus, you don’t need an
expensive device like a Fleshlight when you already have the
comfort of your bed. So don’t underestimate the power of a simple,
trusty mattress for self-gratification.

If you’re after a simple homemade pocket pussy,
buy yourself a roll of bubble
wrapI have a decade of experience in the industry, and I’m
here to share a unique sexual experience with you. Utilizing bubble
wrap and a towel, I created a sensation like no other. Start by
wrapping the bubble wrap around your manhood and then cover it with
a towel. This gives you something to hold onto as you thrust
against the bubble wrap, providing an intense feeling. Don’t forget
to use lots of lubricant and possibly a condom too.

Another DIY sex toy for men who aren’t gifted
craftspeople, this is one of the easiest ways to make an artificial
vagina “Fleshlight”. Take a woolly
sockAs an expert with 10 years of industry experience, I
can confidently say that creating a latex-lined woolly sock doesn’t
need to be complicated. Begin by taking a sock and rolling it upon
itself until it takes on a donut-like shape. Then, slip a latex
glove inside the sock and unroll it. Voila! You now have a
latex-lined woolly sock. It’s as simple as that!

23. ODDHILD Ikea throw

[add_toplist_link post=22]

While I was shopping in IKEA, I happened to find
the ODDHILD couch throw for £2. This throw is rolled up and comes
in a little fabric pouch, similar to a sleeping bag. If you pull
this throw out of the pouch, cut off about 15 inches of length,
roll it up loosely and put it back in the pouch, there is now
enough room to comfortably fuck the
center of the rolled-up throw.

 I covered this in my video at the top of the page. You could
use a condom or latex glove and pull the edges over the outside of
the pouch to catch your semen. It’s cheap, it’s easy, and you
control how much resistance you want by cutting off more/less of
the throw material.

Okay, this isn’t a homemade pocket pussy, but it
is A LOT cheaper than a Fleshlight sex toy. Low-price pocket pussies like the Mefe
MasturbatorAs an expert with 10 years of industry experience, I can
tell you that budget masturbators can be just as satisfying as a
Fleshlight. While they may not have the same full feel, there are
some that will cost you less than $20 – a definite bonus! For those
of us who are willing to invest a bit more money, there are plenty
of options that can rival the Fleshlight. These budget masturbators
provide a great way to enjoy the same pleasure without breaking the
bank.

Other companies like LoveHoney sell cheap
fleshlight alternatives for $11.49 and Tenga Egg strokers for
$12.99. Just because you can’t afford a Fleshlight doesn’t mean
that you can’t afford cheap male sex toys – it doesn’t
have to be toilet paper and rubber bands!As a 10-year
industry veteran, I’m here to tell you that there are plenty of
options when it comes to exploring and creating new toys. From the
simplest do-it-yourself projects to more elaborate and expensive
items, there’s something for everyone regardless of their budget.
You can find all sorts of interesting materials to work with, from
wood and plastic to fabric and metal. Of course, you can also
purchase pre-made toys at any store. But why not challenge yourself
and make something unique and special? With a little bit of
determination and some creativity, you can make a toy that will
bring joy and excitement to your life. So go ahead and give it a
shot!

Cum-clusion

I hope you enjoyed this guide on how to make
your own DIY Fleshlight toys! Did you try any of the designs
yourself? Perhaps you found some variations which work even better?
If so, share them with us in the comments below! Have fun, stay
safe, and experience this wide variety of penis-tingling sensations for a fraction of
the price of a Fleshlight!